The consumption of energy and water in hospital is much higher, hospital should adopt strictly energy saving measurements .
First, power, heat and water supply departments should be as close to the load center as possible to reduce transmission distance and energy consumption.
The construction layout should have regular configuration , reduce the heat loss of
The FFU Features: Low energy consumption, low noise, convenience and flexibility , saving space and easy installation
Low Energy Consumption: According to the components of FFU, only the mini-fan needs to consume energy, and the power of the micro fan is normally between 110W and 190w. Although the initial investment of
Class I special clean operating room, applies to arthroplasty, organ transplantation, Brain surgery, Cardiac surgery, aseptic operation of gynaecology surgery.
Class II Standard clean operating room, applies to Thoracic surgery, Plastic Surgery, Urology Surgery, hepatopancreatobiliary surgery, surgery of Orthopaedics and Traumatology, Oocyte retrieval and aseptic operation of general surgery.
Class III General clean operating room、apply to
There are two kinds of usual air handling methods in clean room. MAU+AHU+HEPA（short for AHU System）and MAU+FFU+DC dry coil(short for FFU System).
Through the comparison of this two methods, it is concluded that FFU acts as a purification cycle unit in the purification air conditioning system, and the circulating air volume in
Infections diseases Hospital
Outpatient Dept & referal dept.
emergency dept.
medical technical sections
inpatient dept.
logistic dept.
Computerized Tomography
Electro cardiograph
Electro
Picturized Archiefing communication system
Laboratory information system
Radiology information system
Intensive Care Unit
Respiratory Intensive Care Unit
negative air pressure ward
negative air pressure operating room
Isolated ward
anteroom
Disease inspection ward
Screening room
Success Way Clean Technology Co., Ltd. is professional clean room turnkey solution provider which has
The clean operating room should be in its own area and arranged in close proximity to the surgical operation related nursing unit.Its location should be decided with comprehensive consideration, and should linked with central supply room, blood bank, and the department of pathology . Design the convenient transportation and access in advance for small material ladder,
Clean laboratory （BSL－3 Lab）should be isolated in buildings (with access control) or independent buildings. Environmental parameters and other points of attention in the planning of clean laboratories.
Environmental parameters
1) Relative to outdoor atmospheric pressure, the contaminated area is – 40Pa (nominal value), and keeps a safe and reasonable pressure difference with the bio-safety
Clean laboratory （BSL－3 Lab）should be isolated in buildings (with access control) or independent buildings. And the selection of special equipment installation in the planning of clean laboratory should be paid attention to as follows:
1) Class II or Class III Bio-safety Cabinet should be provided which should conform to the Safety and Work Requirements.
Clean laboratory （BSL－3 Lab）should be isolated in buildings (with access control) or independent buildings. Clean laboratory （BSL－3 Lab）should be noticed ventilation system in designing.
Ventilation System
1) Independent ventilation system should be set to control air flow direction and pressure gradient in laboratory. It should be ensured that the air flow from the
Clean laboratory （BSL－3 Lab）should be isolated in buildings (with access control) or independent buildings. Clean laboratory （BSL－3 Lab） should pay attention to layout and enclosure structure when designing.
1 Layout
1) Clean laboratory consists of clean area, semi polluted and polluted area. Buffer rooms should be provided between polluted and semi polluted area. If necessary,